Commercial 13L Ultrasonic Cleaner 300W 400W Heating Constant Temperature

The GT SONIC-T13 is the first model in the series that feels like workshop equipment rather than bench equipment. Its 330 x 300 x 150 mm tank holds thirteen litres, which covers complete carburettor assemblies, small gearbox casings, pump bodies, brake components, optical sub assemblies and full trays of machined parts. 300 W of ultrasonic power at 40 kHz is driven through a denser transducer array, and the two stage switch lets an operator choose between maximum cleaning force and a gentler setting for finished surfaces. The 400 W heater with constant temperature sensing holds thirteen litres between 20 and 80 degrees Celsius during continuous loading, and the leak proof tank construction is specified for daily commercial use.

• Thirteen litre commercial tank: A 330 x 300 x 150 mm cavity accepts assembled components and full trays, reducing handling compared with cleaning parts one at a time.
• 300 W ultrasonic power: A denser transducer layout maintains cavitation intensity across the larger floor, so a packed tray still cleans in a single timed cycle.
• Two stage power switch: Heavy degreasing and precision finishing share one bath: full power for carbon and scale, reduced power for aluminium, plated parts and thin sections.
• 400 W heater with sensing: The heater brings thirteen litres up to temperature quickly and holds it against a sensor, so the bath does not sag when cold parts are added.
• Illuminated rotary control: Timer and thermostat use 360 degree illuminated knobs, which remain readable in a workshop and can be adjusted without removing gloves.
• Leak proof, patent protected build: New seam welding and full leak testing protect the electronics, and the design is patent protected so copies do not match the tested construction.

The T13 is common in automotive service, optics and general engineering. Workshops clean carburettors, throttle bodies, injector sets, brake calipers, brake master cylinders, small gearbox casings and pump housings before inspection. Optical and camera repair benches clean lens barrels, mounts and mechanical assemblies, electronics shops clean connector housings and heat sinks, and jewellery manufacturers process trays of castings and settings after polishing. Laboratories clean larger glassware batches, sieve sets and filter housings, and dental labs process full instrument trays.

The T series is covered by CE verification (T188066801 and T188066802), RoHS compliance (T188066803), FCC verification (T188103901 and T188103902) and REACH compliance (T188085501). Report copies are supplied with the shipping documents for customs clearance, tender submission and distributor registration, and the design is patent protected, so a repeat order matches the tested sample rather than drifting between production runs.

Every T13 ships in a foam lined gift box inside a master carton with basket, lid, cord and manual, and cartons are palletised for container loading. Each unit is run loaded for two hours and checked for heater ramp, insulation resistance, tank leakage and control function, with the record kept against the serial number. The one year warranty covers generator, transducers and heater, and spare parts are held in stock.

Send us the largest assembly you plan to immerse and the daily volume, and we will confirm the thirteen litre tank or quote the T20 for higher throughput.