Smart Touch 2L Ultrasonic Cleaner 50W 8K Titanium Panel Degassing Mode

The GT SONIC-S2 is a 2 litre benchtop ultrasonic cleaner designed for the bench where space is short but cleanliness still matters. Its 150 x 135 x 100 mm tank takes slides, pipette racks, small glassware, optical components, dental instruments, jewellery and electronic samples in one load, and the 50 W transducer set delivers 40 kHz cavitation that is gentle on polished surfaces yet strong enough to lift fingerprints, oils and polishing residue from blind holes. The front panel is finished in 8K titanium alloy with a mirror polish, and the whole unit is operated from a sealed touch interface, so there are no knobs to knock or gaps for liquid to enter. Heating runs from 30 to 80 degrees Celsius with a 100 W element, which is exactly the range most aqueous laboratory detergents need.

• 8K titanium alloy panel: The industry-first 8K titanium finish gives the front face high hardness, high flatness and a mirror gloss, resists fingerprints and stays clean in daily handling, which matters when the unit sits on a customer facing counter.
• Smart touch control: Every function runs from one sealed touch panel, so cycle time, temperature and degassing are set with a light touch and there are no mechanical switches to wear out or traps for spilled liquid.
• 1 to 99 minute timer: The timer covers a single minute up to ninety nine minutes, which suits both a quick rinse of optical parts and a longer extraction cycle on soil samples without resetting the machine.
• Ultrasonic degassing: A dedicated degassing mode drives dissolved air out of fresh detergent, so the bath reaches full cavitation intensity faster and samples are not shielded by bubbles clinging to the surface.
• Heating from 30 to 80 degrees Celsius: The 100 W heater brings a two litre bath to working temperature quickly and holds it, which improves removal of fats, waxes and cosmetic residues without boiling delicate samples.
• Separate safety power switch: A physical main switch isolates the ultrasonic generator from the mains with one action, which is the arrangement most laboratories require for unattended bench equipment.

The S2 is used in sample preparation benches where small volumes and repeatable conditions matter. Agronomy and food science laboratories clean sieves, crucibles, sample tubes and digestion vessels; cosmetic and pharmaceutical labs remove creams, oils and pigment from glassware and small tools; biochemistry benches use it for degassing buffers and dispersing compounds before analysis. Clinical and dental practices clean hand instruments, burs and impression trays. Jewellers and watchmakers use the 40 kHz bath for chains, settings and cases after polishing, and electronics technicians clean small boards, connectors and optical parts where a larger tank would be wasteful.

This model is supplied with CE verification (report numbers T188066801 and T188066802), RoHS compliance (T188066803), FCC verification (T188103901 and T188103902) and REACH compliance (T188085501). Copies of the test reports are available on request for customs clearance, tender documentation and distributor registration, and the production line is audited annually against the same test criteria so that a repeat order matches the sample.

Each unit ships in a gift box with a plastic bag around the machine, a basket, a lid, a power cord and a manual, then packs into a master carton for container or air shipment. Every unit is powered for a two hour run, checked for heater ramp, transducer output and touch panel response, and the tank is leak tested before packing. The one year warranty covers the generator board, transducers and heater element, with spare baskets, lids and boards held in stock for fast replacement.

Send us the parts you plan to clean and the volume of liquid you need, and we will confirm whether the 2 litre tank is right or recommend the S3 or S6 model.