Titanium Panel 3L Bench Ultrasonic Cleaner 100W Heated Laboratory Bath

The GT SONIC-S3 doubles the working length of the S2 while keeping the same bench footprint family, with a 240 x 135 x 100 mm tank that swallows long items such as graduated pipettes, burettes, surgical forceps, dental mirror handles, long drill bits and rail mounted electronic assemblies. 100 W of ultrasonic power at 40 kHz fills the elongated tank evenly, so a rack of tubes standing side by side is cleaned in one cycle instead of being rotated. The 8K titanium front panel and sealed touch interface keep the unit presentable on an open laboratory bench, and the 30 to 80 degrees Celsius heater with a 100 W element is sized to hold temperature in a three litre bath during repeated loading.

• Elongated 3 litre tank: The 240 x 135 x 100 mm cavity is shaped for long instruments and racks of tubes, which removes the need to lay parts diagonally or clean them in several batches.
• 8K titanium alloy face: The mirror polished titanium panel resists scratches and fingerprints, keeps its gloss after repeated wiping with alcohol, and lifts the perceived quality of the bench instrument.
• Smart touch operation: Time, temperature and degassing are all set from one sealed touch panel, with a clear display that stays readable under laboratory lighting.
• 40 kHz at 100 W: Cavitation at 40 kHz is energetic enough for greasy glassware and fine enough that plated instrument surfaces and thin foils come out without pitting.
• Degassing and heating: The degassing cycle removes dissolved air from fresh solution while the heater holds 30 to 80 degrees Celsius, so detergent activity and cavitation intensity stay at the intended level.
• Safe unattended operation: A separate main power switch, dry run protection on the heater and a stainless tank with a rolled edge make the unit safe to leave running through a timed cycle.

The S3 is common in laboratories that handle long glassware and instrument trays. Food and beverage quality labs clean pipettes, hydrometer jars, filter holders and sample cups; environmental labs clean digestion tubes and sampling bottles; cosmetics labs remove cream and pigment from spatulas, beakers and mixing rods. Dental and veterinary clinics use it for hand instruments and burs, while electronics and optics benches clean long connectors, ferrules, ferrules assemblies and small lens barrels. Gemmological labs use the 40 kHz bath for stones and settings after pickling.

This model is supplied with CE verification (report numbers T188066801 and T188066802), RoHS compliance (T188066803), FCC verification (T188103901 and T188103902) and REACH compliance (T188085501). Copies of the test reports are available on request for customs clearance, tender documentation and distributor registration, and the production line is audited annually against the same test criteria so that a repeat order matches the sample.

Packing follows the same structure as the S2: plastic bag, gift box, then master carton with the basket, lid, cord and manual inside. Each machine completes a two hour run test, heater ramp check, insulation test and tank leak test before shipment, and the serial number is recorded on the inspection sheet. The one year warranty covers generator board, transducers and heater, with remote diagnostics and stocked spares to keep bench downtime short.

Tell us the length of the longest item you need to immerse and the daily cycle count, and we will confirm the S3 or step you up to the S6.