Laboratory 6L Ultrasonic Cleaning Bath 150W 300W Heater 0-99 Minute Timer

The GT SONIC-S6 is the volume step for laboratories and workshops that process batches rather than single items. Its 300 x 150 x 150 mm tank holds six litres, enough for racks of beakers and flasks, full instrument trays, small pump components, optical assemblies and stacks of PCB panels. 150 W of ultrasonic power at 40 kHz is spread across the tank floor so a rack standing in the bath cleans evenly, and the 300 W heater brings six litres to temperature far faster than the smaller models. The same 8K titanium panel, sealed touch control and 1 to 99 minute timer are carried over, with degassing available before critical cycles so that fresh solution does not stall the first few minutes of cavitation.

• Six litre batch tank: A 300 x 150 x 150 mm cavity takes test tube racks, beaker batches and instrument trays in one cycle, so a laboratory can run preparation for a whole day in a few loads.
• 300 W heating element: The larger heater matches the larger bath, reaching 30 to 80 degrees Celsius quickly and recovering after cold racks are loaded instead of drifting below the set point.
• 150 W ultrasonic power: Transducers distributed under the full tank floor keep cavitation density uniform, which is what allows densely packed racks to clean without manual repositioning.
• 8K titanium alloy front: A mirror polished titanium face resists solvent wiping and stays free of fingerprints, keeping the instrument presentable in a shared laboratory or a customer facing showroom.
• Smart touch with 1 to 99 minutes: Cycle length is entered directly on the touch panel, covering a two minute rinse through a ninety nine minute extraction without a separate timer box on the bench.
• Degassing and safety isolation: A dedicated degassing mode plus a mechanical main power switch covers the two requirements most laboratory safety reviews ask for: full cavitation from the start and one action isolation from the mains.

The S6 serves laboratories and production cells that clean in batches. Pharmaceutical and cosmetic quality control labs process beakers, volumetric glassware, filter assemblies and mixing tools; food testing labs clean sample jars, sieve sets and homogeniser parts; university and research benches use it for sample dispersion, emulsification, extraction and degassing before chromatography. Electronics production cleans stencil wipes, small boards, connectors and machined housings, while dental and optical workshops process trays of instruments and lens mounts. Maintenance departments use it for small pump parts, valves and bearings before inspection.

This model is supplied with CE verification (report numbers T188066801 and T188066802), RoHS compliance (T188066803), FCC verification (T188103901 and T188103902) and REACH compliance (T188085501). Copies of the test reports are available on request for customs clearance, tender documentation and distributor registration, and the production line is audited annually against the same test criteria so that a repeat order matches the sample.

The S6 ships in a moulded foam gift box inside a master carton, with basket, lid, cord and manual, and cartons are palletised for container loading. Each unit is tested with a loaded two hour run, a heater ramp check, an insulation resistance test and a tank leak test, and the inspection sheet is filed against the serial number. The one year warranty covers generator, transducers and heater, with spare baskets and boards kept in stock.

Send the rack or tray dimensions you plan to immerse and the number of cycles per day, and we will confirm the six litre tank or quote the S9 for larger loads.