Two Stage 3L Ultrasonic Cleaning Machine 100W Heater Illuminated Knob Control

The GT SONIC-T3 stretches the working length to 240 mm while keeping the compact body of the series, which makes it the practical choice for long instruments that will not lie flat in a small square tank. Pipettes, forceps, bur shafts, long drill bits, tweezers, ferrules and rail mounted boards fit end to end, and the 100 W transducer set at 40 kHz fills the elongated floor evenly. Timer and temperature sit on illuminated 360 degree knobs with clear light columns, so the settings are visible across a workshop bench, and the two stage power switch covers both aggressive degreasing and gentle cleaning of plated surfaces. Heating runs from 20 to 80 degrees Celsius with constant temperature sensing.

• Elongated three litre tank: The 240 x 135 x 100 mm cavity accepts long instruments and tube racks laid flat, which avoids tilting parts against the tank wall and blocking cavitation.
• Two stage power switching: Operators can run the full power level for burnt oil and carbon, then drop to the lower level for plated, polished or thin walled parts in the same solution.
• Illuminated knob control: The timer and thermostat knobs carry light columns and turn through 360 degrees, so a setting can be made quickly even with oily hands and read from a distance.
• Constant temperature heating: Temperature sensing holds the bath between 20 and 80 degrees Celsius, which keeps detergent active through a shift instead of drifting as cold parts are loaded.
• Leak proof SUS304 tank: Tank seams use a new welding and sealing process and every unit is leak tested, protecting the electronics bay from the slow seepage that ruins cheap machines.
• Rear isolation switch: A main switch at the rear disconnects the machine completely when the bench closes for the day, removing standby draw and protecting service work.

The T3 is a common choice in dental, optical and electronics workshops where long thin items dominate the workload. Dental labs clean forceps, mirror handles, bur shafts and impression trays; optical shops clean temple parts, nose pads and lens mounts; electronics benches clean long connectors, edge connectors and probe assemblies. Jewellers and watch repairers use it for chains, bracelets and long case parts, and small machine shops clean drill bits, reamers, taps and small shafts before inspection or coating.

The T series is covered by CE verification (T188066801 and T188066802), RoHS compliance (T188066803), FCC verification (T188103901 and T188103902) and REACH compliance (T188085501). Report copies are supplied with the shipping documents for customs clearance, tender submission and distributor registration, and the design is patent protected, so a repeat order matches the tested sample rather than drifting between production runs.

Packing uses a foam lined gift box inside a master carton, with basket, lid, cord and manual. Each unit is load tested for two hours, checked for heater ramp, tank leakage, knob travel and light column function, and the inspection record is filed against the serial number. The one year warranty covers generator board, transducers and heater, and spare baskets, lids and knobs are stocked for fast replacement.

Tell us the length of the longest part you clean and the cycles per day, and we will confirm the T3 or move you up to the T6 for batch work.